PDA

Ver la Versión Completa : COMPUTADORA PARA SE-R

turboser
03-11-2004, 10:17:47
Como ven esta computadora para el spec, es de tilen y tiene tres programas tock, valet y performance y lo mejor de todo es que es un bolt on :P parece interesante aqui les dejo el link http://www.stillen.com/Sportscars_detail.asp?cat=2&subcat=286&Brand=&id=44013&page=1
Kaliman
03-11-2004, 10:23:49
OK you Spec V horsepower junkies - here's some more! By optimizing fuel/air management, the QR-Pro gets the most out of your 2.5 liter engine. We saw a 6hp increase at the front wheels (on our dynojet dyno) and huge gains in proper air/fuel ratios throughout the power band. The unit wires directly to your stock ECU, unlocking the hidden performance of your Spec V throughout the entire RPM band. The QR-Pro is pre-programmed and is dual mapped (PERFORMANCE map and the VALET map). The VALET map lets you lend the car to mom without scaring her to death. These are preset maps that can not be re-programmed. Also provided with this unit is a mountable toggle switch, allowing you to switch between maps on the fly. Another added feature of the QR-Pro is the included bypass connector that returns the ECU to stock programming mode. Installation instructions are included.

Es Stillen, debe funcionar...
ÿò$Hï
22-11-2004, 15:53:26
Es el STILLEN QR-PRO.

OK you Spec V horsepower junkies - here's some more! By optimizing fuel/air management, the QR-Pro gets the most out of your 2.5 liter engine. We saw a 6hp increase at the front wheels (on our dynojet dyno) and huge gains in proper air/fuel ratios throughout the power band. The unit wires directly to your stock ECU, unlocking the hidden performance of your Spec V throughout the entire RPM band. The QR-Pro is pre-programmed and is dual mapped (PERFORMANCE map and the VALET map). The VALET map lets you lend the car to mom without scaring her to death. These are preset maps that can not be re-programmed. Also provided with this unit is a mountable toggle switch, allowing you to switch between maps on the fly. Another added feature of the QR-Pro is the included bypass connector that returns the ECU to stock programming mode. Installation instructions are included.
http://www.stillen.com/product_images/602025_f.jpg

En cuanto Mike me comentó, me encantó la idea. Parece que se quieren adelantar a JWT y a TechnoSquare (http://www.technosquareinc.com/new.htm), No me convence tanto la idea de que sea un bolt-on, pero como dicen, si es Stillen, seguramente funciona.